Jason Gorman Posted April 16, 2009 Report Share Posted April 16, 2009 I just received my F-Bracket from Tiffen (using a Flyer) and if I am not mistaken it appears the bracket was assembled incorrectly, the hole for the arm and post for the gimbal are on opposite sides, is this correct or incorrect? If so is it an easy fix as I need it for Saturday! Thanks Jason Quote Link to comment Share on other sites More sharing options...
Richard James Lewis Posted April 17, 2009 Report Share Posted April 17, 2009 http://photos.mikkowilson.com/F-Bracket.jpg Should look like this. The hole is where the pinky is. If not, undo the two grub screws, pull out the pin, slide it in the other way, tighten...done. Rick. Photo by Mikko Wilson. I just received my F-Bracket from Tiffen (using a Flyer) and if I am not mistaken it appears the bracket was assembled incorrectly, the hole for the arm and post for the gimbal are on opposite sides, is this correct or incorrect? If so is it an easy fix as I need it for Saturday! Thanks Jason Quote Link to comment Share on other sites More sharing options...
Jason Gorman Posted April 17, 2009 Author Report Share Posted April 17, 2009 Thanks Rick that's what I thought Quote Link to comment Share on other sites More sharing options...
Jason Gorman Posted April 17, 2009 Author Report Share Posted April 17, 2009 Does the pin need to stay at about 45' angle to the nuts? Thanks Jason Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.